Fujitsu fi Series Image Scanner Product

Home | Products | FAQ |

Home > Download > FUJITSU TWAIN32 Version 5.6

Fujitsu fi Series Image Scanner Product

Download

FUJITSU TWAIN32 Version 5.6

The device driver which is complied with the TWAIN Toolkit^* is available to download from this page.

*TWAIN Toolkit is the TWAIN specification itself.

Supported Scanner Model

M3099GH
M3099GX
M3099G
M3097DG
M3097G

Microsoft(R) Windows (R) 95/ Windows(R) 98
Microsoft(R) Windows(R) Millennium Edition
Microsoft(R) WindowsNT (R) Workstation4.0
Microsoft(R) WindowsNT (R) Server4.0
Microsoft(R) Windows (R) 2000 Professional Edition

Notes
The 32bits ASPI manager, which works with your SCSI card appropiately, is required to use this device driver. The ASPI manager itself is provided by SCSI card vendors.

The software we are providing here is downloadable only in the case when you agreed "the terms of the Software license agreement". Read this "the terms of the Software license agreement" carefully, before you download the software. By downloading this driver software, you are deemed to have agreed on this agreement.

Prepare the enough hard-disk space.
Download the Driver to your Hard Disk by clicking the "Download" shown below.

Version 5.6.16.1x16	Disk space
[Download]ft56g1wg.exe (size: 4.64MB)	10Mbyte

Extract the downloaded archive file.
For example, execute the following command, and extract the file to your Hard Disk.

C:¥>	[drive:][¥path][¥filename] [drive:] is the drive name where the downloaded file is stored. [¥path] is the pass name where the downloaded file is stored. [¥filename] is the file name to be downloaded.

Install the driver software in accordance with the following notes and methods.

1.	Please check if the scanner works correctly after install the Interface Adapter (SCSI-2).
2.	Install the 32bits ASPI manager bundled in the Interface Adapter. Fujitsu Japan confirmed its operation with the 32bits ASPI manager V4.01 or later version. If the ASPI manager earlier than V4.01 is installed, please contact the SCSI Interface adapter vendor and obtain the latest version. About the method of installation and confirmation, refer to the instruction provided with your adapter card.

For Windows(R)95 user

32bits ASPI manager V4.01 or later version is required to install for the scanner. If you installed the ASPI manager earlier than V4.01, the scanner may not work normally. At start-up time, if the dialogue "Unknown device is found" appeared on the screen, press "Next" and close that dialogue. The device is registered as an "Unknown device" but it is able to use with no problem.
Depending on the version of Windows95, the name of this device driver "FUJITSU TWAIN32" may not appear on the "Select Source" of an application. If the version 4.00.950 or 4.00.950a of Windows95 is used, obtain and install the latest version of the COMDLG32.DLL file provided by Microsoft Inc. This file is included in the Internet Explorer 4.0 etc.

For WindowsNT(R)4.0 user

Make sure to log in from the authority of administrator, and then start the installation. 32bits ASPI manager V4.01 or later version is required to install for the scanner.

For Windows(R)98 user

At start-up time, if the dialogue "Unknown device is found" appeared on the screen, press "Next" and close that dialogue. The device is registered as an "Unknown device" but it is able to use with no problem. If the driver version 6 is installed in your device, the scanner is registered as an Image scanner device. The 32bits ASPI manager V4.01 or later version is required to install for the scanner.

For Windows(R)2000 Professional Edition user

Make sure to log in from the authority of administrator, and then start the installation. At start-up time, if the dialogue "Unknown device is found" appeared on the screen, press "Next" and close that dialogue. The device is registered as an "Unknown device" but it is able to use with no problem. If the driver version 6 is installed in your device, the scanner is registered as an Image scanner. The 32bits ASPI manager V4.60 or later version is required to install for the scanner device.

For Windows(R)Me user

At start-up time, if the dialogue "Unknown device is found" appeared on the screen, press "Next" and close that dialogue. The device is registered as an "Unknown device" but it is able to use with no problem. If the driver version 6 is installed in your device, the scanner is registered as an Image scanner device. The 32bits ASPI manager V4.60 or later version is required to install for the scanner.

For any technical inquiries, please contact the location where you obtained the model.

Contacts |